Showing posts with label painting. Show all posts
Showing posts with label painting. Show all posts

Friday, February 10, 2012

Craigslist Wine Rack Update


So it's only taken me 7 months to finally finish my wine rack. We had a busy fall with Mini DIY starting preschool and then all the illnesses that come along with preschool germs.

A couple weekends ago, I decided enough was enough and I was going to finish my wine rack. I needed to get the wine out of my cabinets and my hubby needed the wine rack out of the shed. Now that it is finished, I've determined I have too much wine and need a bigger rack. Or I could just drink it. :)

If you remember, the wine rack was in pretty sad shape. Lots of dust, mildew, and some missing screws. Since it was only $10, I figured I could do something with it. After a good cleaning, repairing and sanding, I finally decided on a color: Valspar's Lake Country #5003-5C.

I'm really loving all the aqua and turquoise that I'm seeing out in blogland these days. It's quite a stretch from my typical decorating style. A style that I'm slowly but surely changing. I grabbed a million paint chips and spent a good hour pouring over them in the Lowes paint department...like I do everytime I decide to paint something. I picked Lake Country on a whim and I love it!

I painted one coat of Kilz primer and 2 coats of Lake Country on. I hit the edges and a few other places with the palm sander to distress it. After the paint had dried, I rubbed on a Valspar Antiquing Glaze all over. I think it toned down the paint color and gave it a nice rustic finish.

I didn't take any pictures of the painting and staining of the wine rack. I figure that is pretty self-explanatory.

The top that Mr. DIY cut for me is stained with a couple coats of Minwax Special Walnut. I decided that it wasn't really dark enough for me so after the Special Walnut dried, I went back over it with a couple coats of Minwax Dark Walnut.

So without further ado, here is my new wine rack.




And just a reminder of what it looked like before:




Wednesday, September 14, 2011

The Antique Wardrobe

The antique wardrobe is finished...for now. Mr. DIY is still digging in his heels about painting the exterior of the wardrobe. After a good cleaning with bleach and Lysol, I got started.


Mr. DIY is 6'2". The wardrobe is over 7 feet tall.

The interior was a rough, unfinished wood. I used an old "junk" brush to prime. Due to the previous inhabitants of said wardrobe, I wanted to make sure every inch was covered.

I thought I chose a nice, fresh olive green color for the interior. Instead it looked like neon yellow. I tried to live with it for a few days. It wasn't happening. Back to Lowes I went.

The new color I chose is called Weathered Glass (EB8-3) by Eddie Bauer Home at Lowes. It is nice and bright and gives me a feeling of clean when I open the doors. The pictures are not great because I took them with my old point and shoot...and they were taken indoors. The dark spot you see on some of the pictures is something on the lens inside the camera. I'll use my Rebel XT from now on.



When I finished painting, Mr. DIY built new shelves for both sides of the wardrobe. They are got a fresh coat of Weathered Glass.

For now, it is still sitting in our dining room. It is too big to maneuver it into our bedroom. Slowly but surely, I'll get it moved into our home office. I will use it to store cherished, hand-quilted quilts, embroidered doilies, runners, and pillow cases made by Mr. DIY's grandmother. It also holds grandma's wedding gown and my wedding gown.

Wednesday, July 27, 2011

Craigslist Wine Rack

What can I say? We've had a busy summer and I'm just a lousy blogger.

I'm in the middle of refinishing a wooden wine rack that I purchased off Craigslist.


It was very wobbly and required new screws to reinforce it.

Mr. DIY also made a top for it. If you noticed in the first picture, the wine racks are stack-able. Mr. DIY had to drill holes in the top to fit down over the pegs. In order to get the correct depth, we used electrical tape wrapped around the drill bit. When the tape "tail" begins to "dust" the drill shavings from your board and touches the board, you know you have drilled deep enough. It's a neat little trick.

I have it all sanded down and ready to paint; however, I haven't chosen a color yet so it waits.